Belkin Setup n600Belkin Wireless Router SetupHow To

How To Protect A Belkin Router Via WEP?

belkin setup n600

Belkin routers have a simple and elegant line, although the outer shell is plastic and not aluminum. However, the fact remains that Belkin routers are among the devices most appreciated by users, even from an aesthetic point of view.

Before discovering how to protect a Belkin router at its best, it is also important to investigate the question of their installation, which, due to its simplicity, is highly appreciated by users who rely on this brand. The whole procedure, in fact, is completely guided and every component of the product is numbered: in short, making mistakes becomes practically impossible!

Anyone who wants to be on the safe side, however, can always use the supplied CD, while the most skilled can connect directly to the control panel and configure the network and ADSL parameters. Moreover, although the focus of this article is how to protect a Belkin router, it is good to spend a few words on the manual installation procedure of the device, which is very simple and intuitive.

Once the internet connection has been verified, you need to connect the modem to the router’s WAN port and then connect the modem and router to the power source. The next step is to connect the computer to one of the router’s Ethernet ports and then access the device’s web-based setup page. Once the router has established the internet connection, you will be asked to change the name of your network (SSID) and password, which by default are located at the bottom of the device.

About the ease of use of the product, Belkin does not disappoint once the router is configured with the parameters of its own ADSL, all that remains is to start surfing the internet. Now let’s get to the heart of the security issue and see what are the most effective ways to understand how to protect a Belkin router.

How to protect a Belkin router via WEP?

Taking advantage of the wireless network of others is always an unedifying action. For this one of the main tricks to find out how to protect a Belkin router from intruders is to configure Wi-Fi protection. There are three main ways to do this: WEP, WPA / WPA2 or Mac Address Filter. Let’s start with the WEP method, present on all Belkin router models.

WEP, an acronym for Wired Equivalent Privacy, is a security protocol whose main objective is to prevent strangers from connecting to their network. Designed for wireless local area networks (WLAN), the WEP protocol works with 64-bit or 128-bit keys, 10 and 26 hexadecimal digits respectively.

Setting the protocol is simple, just go to the “Protection” item on the configuration settings of your Belkin router, select “64-bit WEP” or “128-bit WEP” and then “Key 1” or “Key 2”. At this point, all that remains is to enter a password of 10 (or 26) characters composed of a combination of numbers from 0 to 9 and letters of the alphabetical range AF. Once the password is set, you will know how to protect a Belkin router from unauthorized access.

We can help you with the process of Belkin setup N600, so if you are using N600 Wi-Fi Range Extender and want to configure it with Belkin router or any other brand of router, then you will have to keep both devices close to each other. If you don’t want to indulge into the Belkin Router setup process, then you can visit the Belkin’s official support website: https://www.belkin.com/us/support/.

Leave a Reply

Your email address will not be published. Required fields are marked *